Views: 0 Author: HONEMIX Content Team Publish Time: 2026-11-10 Origin: Site
Who this guide is for: Procurement, engineering, and operations teams at cosmetics manufacturers and contract manufacturing companies planning a new lipstick production facility, expanding production capacity, or replacing existing equipment. This guide focuses on molded lipstick manufacturing — from mold circulation and thermal processing through cooling, demolding, tube assembly and production line acceptance.
A note on the numbers: Capacity, cooling, dimensions, power and budget figures are planning references based on the configurations and assumptions described in this guide. Final line performance and equipment scope are confirmed through product trials, approved drawings and agreed FAT/SAT criteria.
Selecting a lipstick production line requires more than comparing machine prices or advertised production speeds. The equipment configuration must match the formulation, mold design, cooling requirements, packaging specifications and planned production schedule.
For manufacturers investing in an automated lipstick line, key purchasing decisions include the number of molds required, actual saleable output, upstream material supply, factory installation conditions and long-term operating costs.
This guide uses the HONEMIX HY-KHL 12-head lipstick production system as an engineering reference to explain how to evaluate these factors before placing an order.
Table of Contents
This guide focuses on molded lipstick production using metal molds, followed by cooling, demolding and tube screw capping.
The production process follows six main stages:
Mold Preheating → Filling into Metal Molds → Reheating → Cooling → Demolding → Tube Screw Capping
Each stage has a direct impact on the final product quality and production efficiency.
Process Stage | Production Requirements | Key Purchasing Consideration |
|---|---|---|
Mold Preheating | Bring molds to the required processing temperature | Temperature consistency and mold compatibility |
Filling | Dispense heated lipstick formulation into 12-cavity molds | Filling accuracy and temperature control |
Reheating | Maintain the required thermal condition after filling | Formulation behavior and surface quality |
Cooling | Solidify the lipstick inside the molds | Cooling residence time and mold circulation |
Demolding | Release formed lipstick products from the molds | Mold design and product release quality |
Tube Screw Capping | Transfer and secure lipstick products in tubes | Tube dimensions and closure compatibility |
The HY-KHL integrates these operations into one coordinated production system.
The key engineering decision is to balance filling speed, thermal processing, mold circulation and downstream handling. Increasing filling speed alone will not increase finished-product output if cooling or demolding becomes the production bottleneck.
For detailed machine construction and operating features, see the HY-KHL Automatic 12-Head Lipstick Filling, Cooling, Demolding & Capping Machine.
The investment for a molded lipstick production line depends on the integrated equipment configuration, mold quantity, upstream preparation systems and required production automation.
For preliminary purchasing and budget planning, the following ranges provide a reference for a configuration comparable to the HY-KHL system.
Equipment Scope | Indicative Budget (USD) | Scope Included |
|---|---|---|
Integrated filling, reheating, cooling, demolding and capping system | $70,000–$85,000 | Core lipstick forming and finishing operations |
12-cavity metal molds and additional product-specific tooling | $13,000–$18,000 | Mold sets and tooling matched to product dimensions and cavity design |
Integrated system with standard tooling package | $85,000–$100,000 | Combined reference budget for the integrated system and standard tooling |
The tooling budget depends on mold material, cavity design, product dimensions and the number of compatible mold sets required for production.
A factory planning a more complete manufacturing operation may also require upstream preparation, pigment processing and downstream handling equipment.
Project Component | Indicative Budget (USD) | Scope / Planning Note |
|---|---|---|
Integrated lipstick forming and finishing system with tooling | $85,000–$100,000 | Main forming and finishing equipment package |
Upstream melting, mixing and heated material transfer | $15,000–$30,000 | Bulk preparation and temperature-controlled material supply |
Pigment dispersion and grinding equipment, if required | $8,000–$18,000 | Include when required by the formulation and color process |
Finished-product inspection and downstream handling | $5,000–$12,000 | Product inspection and handling after forming |
Project integration, commissioning, startup spares and trial materials | $8,000–$15,000 | Project coordination and startup support items |
Estimated complete equipment project | $120,000–$175,000 | Indicative total for the listed equipment and project-startup scope |
The total depends on the existing factory infrastructure, formulation requirements, production volume and degree of automation. International freight, import duties, taxes and major facility modifications are budgeted separately.
When comparing proposals from different manufacturers, evaluate the complete supply scope rather than the headline machine price.
Equipment Configuration: Confirm whether filling, reheating, cooling, demolding and capping are included.
Mold and Tooling: Check the number of mold sets, cavity configuration, material and product compatibility.
Upstream Preparation: Identify whether melting tanks, mixing systems and pigment processing equipment are included.
Automation: Compare material handling, mold loading, product transfer and finished-product collection.
Utilities: Review electrical requirements, compressed air and cooling systems.
Project Services: Confirm testing, technical documentation, commissioning, training and spare parts.
A clear quotation should identify included equipment, optional equipment, tooling, buyer-supplied utilities and project responsibilities.
The HY-KHL production system operates with a reference rate of four 12-cavity molds per minute.
The theoretical production calculation is:
4 molds/minute × 12 cavities/mold = 48 units/minute
48 units/minute × 60 = 2,880 units/hour
This is the nominal production rate under the rated operating condition.
Actual saleable output depends on production interruptions, cooling performance, mold handling, cleaning, shade changes, product inspection and rejected products.
For preliminary factory planning, consider three operating scenarios.
Assumptions:
8 scheduled production hours per day.
22 production days per month.
The effective production factor accounts for combined operating and production losses.
Production Scenario | Effective Production Factor | Modeled Output/Hour | Modeled Output/Month |
|---|---|---|---|
Frequent changeovers and short production runs | 45% | 1,296 | 228,096 |
Balanced production schedule | 65% | 1,872 | 329,472 |
Longer, stable production campaigns | 75% | 2,160 | 380,160 |
These figures are illustrative planning scenarios. The actual production factor should be established through product trials and the agreed operating schedule.
For the balanced scenario:
2,880 × 65% × 8 × 22 = 329,472 units/month
Consider a manufacturer targeting 300,000 lipstick units per month.
The balanced scenario provides approximately 329,472 units, leaving around 29,472 units of modeled monthly capacity above the demand target.
Before selecting a higher-capacity system, evaluate whether the production target can be achieved through:
Longer production campaigns.
Reduced shade changeover time.
More efficient mold circulation.
Additional operating hours or shifts.
Improved upstream material availability.
Better coordination between cooling and downstream handling.
A manufacturer producing a small number of high-volume shades has different capacity requirements from a contract manufacturer handling frequent small-batch orders.
The purchasing objective should be to achieve the required number of accepted finished products, not simply the highest theoretical machine speed.
Cooling is one of the most important capacity considerations in molded lipstick manufacturing.
The HY-KHL cooling tunnel uses air cooling, with a reference cooling air temperature of −15°C and a product cooling residence time of 5–15 minutes.
Because the molds remain in the cooling process for this period, the number of circulating mold sets must be calculated together with the filling rate.
The calculation is:
Mold sets required in cooling = Mold entry rate × Cooling residence time
The reference mold entry rate is four sets per minute.
Cooling Residence Time | Mold Sets in Cooling | Product Positions (12 Cavities/Set) |
|---|---|---|
5 minutes | 20 sets | 240 positions |
10 minutes | 40 sets | 480 positions |
15 minutes | 60 sets | 720 positions |
For example, at a 10-minute cooling residence time, approximately 40 mold sets are occupied in the cooling stage at a continuous entry rate of four sets per minute.
These figures represent cooling-stage occupancy only. Additional mold sets are needed for:
Preheating.
Filling.
Reheating.
Demolding.
Mold return and preparation.
Cleaning and inspection.
Production reserves.
The reference tooling quotation includes two separate 12-cavity mold categories:
40 sets of 12-hole metal molds.
15 sets of additional 12-hole lipstick molds.
Their intended functions and compatibility should be confirmed before treating them as one circulating mold pool.
For example, if all 55 sets are compatible with the same production route, the combined quantity would still be below the 60 sets required inside the cooling stage alone at a 15-minute residence time. Additional tooling would be needed for the other process stages.
This demonstrates why mold quantities should not be selected independently of cooling time.
Buyers and engineering teams should establish:
Actual cooling residence time for the selected formulation.
Number of mold sets required throughout the complete production cycle.
Mold compatibility and cavity configuration.
Cooling tunnel capacity and available mold positions.
Product temperature and demolding conditions.
Mold handling, return and preparation arrangements.
The final mold quantity should be based on the complete process cycle rather than the filling machine's rated speed alone.
For applications requiring a dedicated cooling stage, review the HONEMIX KH-CT Lipstick Cooling Tunnel.
Factory planning should account for the complete equipment arrangement, operator access and material transfer rather than using the machine footprint alone.
According to the HY-KHL general arrangement drawing, the reference installation envelope is approximately:
Layout Parameter | Reference Dimension | Planning Check |
|---|---|---|
Overall line length | 6,121 mm | Confirm available floor length, material flow and service access against the approved layout drawing |
Maximum equipment width | 1,280 mm | Allow for operator access, maintenance clearance and adjacent equipment |
Maximum equipment height | 2,038.5 mm | Check ceiling clearance and the route for moving equipment into the production area |
The main equipment modules are arranged along the production direction:
Equipment Module | Reference Length | Layout Role |
|---|---|---|
Filling machine | 1,422 mm | Filling and mold-processing section |
Cooling tunnel | 1,197 mm | Mold cooling and residence section |
Mold release machine | 1,782 mm | Demolding and mold-handling section |
Capping machine | 1,400 mm | Tube assembly and screw-capping section |
These are equipment drawing dimensions. The final installation layout should use the approved general arrangement drawing and account for conveyor connections, access and maintenance clearances.
The factory layout should provide sufficient space for:
Mold loading and preheating.
Filling and reheating operations.
Cooling tunnel access.
Demolding and capping.
Mold handling and temporary storage.
Finished-product inspection and collection.
Electrical cabinets and utility connections.
Cleaning and maintenance.
Operator movement and emergency access.
The actual production area will therefore be larger than the equipment footprint.
For manufacturers planning to produce multiple lip product formats, factory layout should also account for shared upstream preparation and separate processing, filling and packaging routes for lipstick, lip balm and lip gloss. HONEMIX's Lip Products Production Line presents an integrated plant configuration covering these production stages.
The HY-KHL reference configuration has a total listed power of 17 kW.
The equipment drawing identifies the following main power loads:
Equipment | Reference Power | Electrical Planning Note |
|---|---|---|
Filling machine | 9 kW | Listed main power load for the filling module |
Cooling tunnel | 5 kW | Listed main power load for the cooling module |
Demolding machine | 3 kW | Listed main power load for the demolding module |
Total listed power | 17 kW | Combined listed load for the three equipment modules above |
The reference main supply is 380 V / 3 Phase / 50 Hz, with working air pressure of at least 6 kg/cm² (approximately 5.9 bar).
The actual supply can be adapted to the destination country's electrical requirements.
Before manufacturing, confirm:
Available voltage, frequency and phase.
Total connected load and electrical protection.
Compressed-air pressure and consumption.
Cooling system requirements.
Electrical cabinet and emergency-stop arrangements.
Destination-specific machine safety requirements.
For international projects, the electrical configuration should be agreed before equipment manufacturing rather than adjusted after delivery.
The HY-KHL is equipped with two 20 L temperature-controlled hoppers with adjustable mixing speed.
These hoppers provide heated material supply to the filling system. They do not replace a complete bulk melting, mixing or pigment dispersion process.
For a complete lipstick manufacturing project, upstream capacity should be calculated from the required production output and actual product net weight.
The calculation is:
Material demand (kg/hour) = Accepted units/hour × Net fill weight (g) ÷ 1,000
Assume:
Effective production output: 1,872 units/hour.
Illustrative lipstick net fill weight: 3.5 g/unit.
1,872 × 3.5 ÷ 1,000 = 6.552 kg/hour
For an eight-hour shift:
6.552 × 8 = 52.416 kg/shift
This calculation provides a basis for selecting upstream batch sizes and material supply capacity.
Actual material input should also account for startup waste, transfer residues, sampling and rejected products.
Consider two production orders:
Production Order | Net Fill Weight | Finished Product Requirement |
|---|---|---|
10,000 units | 3.5 g | 35 kg |
1,500 units | 3.5 g | 5.25 kg |
These orders require different batch preparation and material handling arrangements.
When specifying upstream equipment, buyers should provide:
Largest planned production batch.
Smallest planned production batch.
Number of shades and formulations.
Heating and mixing requirements.
Material transfer distance.
Expected production schedule.
For formulations requiring additional pigment dispersion and grinding, the KH-TR Three Roll Mill can be evaluated as part of the upstream processing system.
The equipment selection should follow the actual formulation and dispersion requirements.
For manufacturers producing multiple lipstick shades, changeover time can significantly affect monthly production capacity.
Frequent formulation changes may require cleaning, temperature adjustment, mold replacement and filling parameter adjustments.
Evaluate cleaning access, product residues and the cleaning procedures required between different formulations.
Confirm the adjustments needed for different filling volumes, material temperatures and formulation characteristics.
Review the time required to change molds, verify cavity alignment and prepare the next production run.
Different lipstick tube dimensions and closure designs may require additional tooling or mechanical adjustments.
Where possible, group compatible formulations and shades into longer campaigns to reduce repeated cleaning and setup time.
How long does a typical shade changeover take?
Which material-contact components require cleaning?
Are separate mold configurations required for different products?
How much product remains in the material supply system after a batch?
What checks are required before restarting production?
These factors should be included in the production capacity and operating cost calculations.
An automatic lipstick line still requires an appropriate staffing arrangement.
The labor plan should cover:
Mold preparation and loading.
Product and tube handling.
Finished-product inspection.
Material preparation and supply.
Cleaning and changeover.
Maintenance and production supervision.
The final operator requirement depends on the actual automation scope and whether upstream preparation and downstream packaging are integrated.
A useful purchasing indicator is:
Conversion cost per accepted unit = Total manufacturing conversion costs ÷ Accepted finished units
The cost model should include:
Cost Category | Items to Consider | Cost Planning Focus |
|---|---|---|
Labor | Operators, preparation, inspection and handling | Estimate staffing by shift pattern and automation scope |
Energy | Heating, cooling and auxiliary equipment | Include thermal processing and cooling operation |
Maintenance | Preventive maintenance and repair | Account for scheduled servicing and production interruptions |
Spare Parts | Seals, pneumatic components and replacement parts | Identify critical wear parts and replacement requirements |
Cleaning | Cleaning materials, labor and production time | Include cleaning time between products and shade changes |
Downtime | Lost production during maintenance and interruptions | Factor downtime into effective output and unit conversion cost |
Quality Losses | Rejected products, startup waste and rework | Include startup scrap and non-conforming product losses |
Technical Support | Training and service requirements | Define operator training and technical service scope |
For example, if monthly manufacturing conversion costs are USD 20,000 and accepted output is 300,000 units, the modeled conversion cost is approximately USD 0.067 per unit.
This example excludes formula and packaging materials. Actual costs depend on local labor rates, energy prices, utilization and production conditions.
A lower equipment purchase price does not necessarily mean a lower long-term manufacturing cost.
Compare the expected production utilization, maintenance requirements, spare parts availability, cleaning time, changeover efficiency and technical support when evaluating different equipment configurations.
The most suitable investment is the system that meets the factory's production target with an appropriate balance of capital expenditure, operating cost and production flexibility.
Product compatibility should be evaluated before the equipment configuration is finalized.
For molded lipstick production, testing should use representative formulations, molds and packaging samples.
The evaluation should cover:
Formulation melting and filling temperature.
Filling consistency and product weight.
Mold dimensions and cavity geometry.
Cooling performance and solidification.
Demolding quality and product appearance.
Lipstick tube compatibility.
Tube screw capping performance.
These trials help determine whether the proposed filling, thermal processing and mold circulation configuration is suitable for the buyer's products.
FAT verifies the agreed equipment functions and performance before shipment.
Acceptance Area | Recommended Verification | Evidence to Record |
|---|---|---|
Test Materials | Agreed lipstick formulation and packaging | Approved test material and packaging list |
Mold Compatibility | Approved mold dimensions and cavity arrangement | Confirmed mold drawing and trial record |
Production Speed | Agreed mold cycles and test duration | Recorded cycle rate and continuous-run duration |
Filling Performance | Target filling quantity and agreed tolerance | Measurement results using the agreed test method |
Cooling | Defined cooling conditions and product quality | Recorded cooling conditions and inspected product samples |
Demolding | Product release, deformation and breakage criteria | Sample inspection and defect record |
Capping | Tube assembly and screw capping quality | Assembly and closure inspection record |
Machine Operation | Agreed operating sequence and functions | Functional test checklist |
Safety | Guarding, emergency stops and agreed safety functions | Safety function inspection checklist |
Documentation | Manuals, drawings and spare parts lists | Document handover checklist |
The HY-KHL reference filling accuracy is ±1.5%. For purchasing acceptance, the agreement should define the measurement method, test conditions, sampling quantity and whether the requirement is based on filling volume or finished-product net weight.
SAT verifies the equipment after installation at the customer's factory.
The inspection should include:
Equipment installation and alignment.
Electrical and pneumatic connections.
Cooling system operation.
Upstream and downstream equipment integration.
Trial production under site conditions.
Operator training.
Final functional and performance checks.
The purchase agreement should clearly identify which requirements are verified during FAT and which are confirmed after installation.
International equipment projects require clear documentation and agreed compliance responsibilities.
Before shipment, buyers should confirm the required documentation, including:
General Arrangement Drawings.
Electrical Schematics.
Pneumatic Diagrams.
Operation and Maintenance Manuals.
Spare Parts Lists.
Product-Contact Material Specifications.
FAT Reports.
Maintenance Instructions.
Applicable Conformity Documentation.
Destination-market requirements should be reviewed during the technical planning stage.
For European projects, discuss applicable CE requirements and the associated technical documentation.
For North American projects, confirm the relevant electrical and machinery safety requirements, including whether UL, CSA or other destination-specific evaluations are required.
For regulated manufacturing environments, buyers may also request IQ/OQ/PQ documentation or validation support according to their quality system and project scope.
These requirements should be clearly defined in the technical agreement before manufacturing begins.
A relevant project reference should demonstrate how equipment is configured around actual manufacturing requirements.
In the Belarus Lip Balm and Lipstick Production Project, HONEMIX configured two separate production lines for different lip product formats.
The lipstick line integrates filling, thermal processing, cooling, demolding and tube screw capping. The lip balm line uses a different filling and finishing arrangement.
This project illustrates why molded lipstick and direct-filled lip balm require different production configurations, even when they belong to the same product category.
The U.S. Lip Balm and Shea Butter Jar Filling Project demonstrates a separate application involving heated material preparation, hot filling, cooling and automated jar handling.
This is a related lip care packaging reference, rather than a direct performance reference for molded lipstick production.
It demonstrates how product format, filling temperature, container dimensions and cooling requirements influence equipment configuration.
To prepare a project-specific equipment proposal, buyers should provide:
Information Required | Details to Prepare | Engineering Purpose |
|---|---|---|
Product Information | Lipstick formulation and product specifications | Establish formulation and thermal-processing requirements |
Product Samples | Representative formula and finished product | Evaluate filling, cooling and demolding behavior |
Filling Requirements | Filling volume and net product weight | Define filling settings and accuracy criteria |
Mold Specifications | Mold drawings, dimensions and cavity arrangement | Confirm mold compatibility and circulation requirements |
Tube Packaging | Lipstick tube samples or technical drawings | Verify tube dimensions and product-transfer compatibility |
Closure Design | Cap and tube connection requirements | Confirm screw-capping compatibility |
Production Target | Hourly, daily and monthly demand | Calculate line output and mold quantity requirements |
Product Variety | Number of shades and formulations | Assess changeover and cleaning requirements |
Batch Size | Largest and smallest planned production batches | Match the equipment configuration to the order profile |
Operating Schedule | Working hours, shifts and changeover frequency | Calculate effective production time |
Existing Equipment | Upstream preparation and downstream packaging systems | Define equipment integration and project scope |
Factory Conditions | Available space, voltage, frequency and compressed air | Check layout and utility compatibility |
Acceptance Requirements | Output, filling accuracy, cooling and product quality | Define FAT/SAT verification criteria |
Project Schedule | Expected manufacturing and installation timeline | Coordinate engineering, manufacturing and installation milestones |
Providing these details at the beginning of the project helps determine the appropriate machine configuration, tooling quantity, cooling capacity and complete equipment scope.
Planning a new lipstick manufacturing facility or upgrading your existing production capacity?
Share your product samples, mold drawings, packaging specifications and production targets with HONEMIX.
Our engineering team can evaluate the filling configuration, mold circulation, cooling requirements and supporting equipment to develop a suitable lipstick production line proposal.
Request a Customized Lipstick Production Line Solution
HONEMIX Content Team
Reviewed by the HONEMIX Engineering Team
The HONEMIX Content Team publishes procurement and engineering guides for cosmetics, personal care, home care, food, and pharmaceutical manufacturers. Every guide is reviewed before publication by the HONEMIX Engineering Team — the same engineers who configure vacuum emulsifying systems, mixing and storage tanks, filling and packaging lines, and complete turnkey production lines for customers worldwide.
HONEMIX (Guangzhou Hone Machinery Co., Ltd.) has more than 15 years of machinery manufacturing experience, from process design and bulk-supply calculation through layout planning, FAT/SAT testing, commissioning, and operator training.
Questions about this guide, or want the mold circulation and cooling capacity check run for your product? Ask an engineer, or learn more about how we work.