 |
The HONEMIX HST-SL Perfume Storage Tank With Pneumatic Mixer is designed for fragrance, perfume, cosmetic liquid and light lotion production where clean storage, gentle mixing and convenient transfer are important.
This sealed atmospheric storage tank is suitable for holding and mixing perfume, fragrance liquid, toner, lotion and other low-to-medium viscosity liquid products before filling or further processing. The tank uses a SUS304 stainless steel body, sanitary mirror polishing, sealed lid inlet, pneumatic mixing system, bottom discharge valve and movable wheel frame to support flexible daily production.
For perfume and fragrance manufacturers, the HST-SL is a practical choice when a simple open tank is not clean enough, and a full vacuum mixing system is not required.
| Quantity: | |
|---|---|
HST-SL
HONEMIX
The HST-SL Perfume Storage Tank is a sealed lid atmospheric storage tank built for manufacturers that need a clean, movable and easy-to-operate tank for perfume and cosmetic liquid production.
Unlike an open storage container, the sealed lid design helps protect the liquid during temporary storage and mixing. Unlike a pressure or vacuum vessel, the HST-SL works under normal atmospheric conditions, making it suitable for simple storage, gentle blending and transfer between production steps.
The pneumatic mixing system is suitable for perfume and other liquid formulas that require continuous or intermittent mixing without strong shearing. This helps keep the liquid more uniform before filling, especially when the tank is used as a buffer tank between perfume filtration and perfume filling.
The tank body is made of SUS304 stainless steel with sanitary mirror polishing inside and outside. A sealed inlet is installed on the lid, and the bottom discharge port is equipped with a ball valve for easier liquid release.
The HST-SL uses a sealed lid structure for cleaner storage compared with fully open tanks. It is designed for normal pressure use, making it suitable for perfume, fragrance liquid, cosmetic liquid and other non-pressurized production processes.
This design is suitable for factories that need:
Cleaner temporary storage
Less exposure during production
A simple tank before filling
A movable tank for different production areas
A more sanitary solution than open containers
For alcohol-based perfume production, the final workshop layout and configuration should be confirmed according to local ventilation and safety requirements.
The tank is equipped with a pneumatic mixing system. This type of mixer is suitable for gentle liquid blending and uniform holding of perfume, fragrance liquid, lotion and similar products.
The pneumatic mixer helps:
Keep liquid ingredients evenly distributed
Support stable holding before filling
Reduce manual stirring
Improve consistency between storage and filling
Provide a simple mixing solution for liquid products
It is especially useful when perfume or cosmetic liquid needs to stay uniform during waiting time before filling.
The HST-SL is manufactured with SUS304 stainless steel and follows sanitary production requirements for cosmetic and fragrance applications.
SUS304 stainless steel is widely used in cosmetic and liquid product manufacturing because it is durable, clean and suitable for regular workshop use.
The tank can be used for:
Perfume
Fragrance liquid
Body mist
Toner
Lotion
Cosmetic liquid
Other light liquid products
For special formulas, material grade and contact parts can be customized according to project requirements.
The tank adopts sanitary mirror polishing on both internal and external surfaces. The polishing level is ≥300 mesh.
This helps improve:
Surface smoothness
Cleaning convenience
Product contact hygiene
Workshop appearance
Long-term maintenance
For fragrance and cosmetic liquid production, a smooth tank surface helps reduce residue and supports easier cleaning between batches.
The material inlet is located on the lid and uses a sealed design. This structure supports more controlled feeding and storage compared with fully open tanks.
The sealed lid inlet is suitable for factories that want to reduce unnecessary exposure during liquid transfer, storage and mixing.
The bottom discharge port is equipped with a ball valve. This helps release liquid from the bottom of the tank and supports more complete discharge after storage or mixing.
This design is useful when the tank is connected with:
Perfume filling machine
Liquid filling machine
Transfer hose
Filter housing
Temporary collection container
A bottom discharge structure helps reduce manual handling and makes production flow easier.
The HST-SL is designed with four universal wheels and a handle, making it easy to move within the workshop.
This is useful for small and medium production facilities where one tank may need to serve different process areas, such as:
Mixing area
Filtration area
Filling area
Cleaning area
Temporary storage area
The movable design helps improve production flexibility without requiring a fixed pipeline layout.
The HST-SL Perfume Storage Tank is suitable for liquid storage and gentle mixing in fragrance, cosmetics and personal care production.
Perfume
Eau De Parfum
Eau De Toilette
Cologne
Body Mist
Fragrance Liquid
Alcohol-Based Perfume Liquid
Toner
Lotion
Essence
Light Emulsion
Skin Care Liquid
Cosmetic Liquid Products
Storage After Mixing
Storage After Cooling Or Filtration
Buffer Tank Before Filling
Temporary Holding Tank
Gentle Mixing Before Filling
Transfer Tank Between Production Steps
The HST-SL is designed to help solve common storage and transfer problems in perfume and cosmetic liquid production.
It can help with:
Liquid waiting before filling
Uneven liquid holding during storage
Need for gentle mixing without high shear
Product exposure when using open containers
Difficult movement between workshop areas
Manual transfer from tank to filling machine
Liquid residue left at the bottom of the tank
Need for a compact tank for 100L to 500L batches
For perfume manufacturers, this tank can be used as a practical storage and mixing unit between perfume filtration and perfume filling. For cosmetic liquid manufacturers, it can also be used as a movable holding tank for lotion, toner and other liquid products.
Item | Description |
|---|---|
Model | HST-SL |
Type | Sealed Lid Atmospheric Storage Tank |
Working Volume | 100L / 200L / 300L / 500L |
Material | SUS304 Stainless Steel |
Design Standard | GMP Standard Design And Manufacture |
Surface Finish | Internal And External Sanitary Mirror Polishing ≥300 Mesh |
Mixer Type | Pneumatic Mixing Type |
Inlet | On The Lid, Sealed |
Discharge | Bottom Discharge Port With Ball Valve |
Mobility | Four Universal Wheels, Movable Design |
Other Structure | With Handle |
Application | Perfume, Cream, Lotion And Other Liquid Products |
Note: Final specifications can be customized according to product type, working capacity, viscosity, discharge method, valve size, workshop layout and production process.
The Perfume Mixing Tank can be customized according to different perfume and cosmetic liquid production requirements.
Available options may include:
SUS316L Product Contact Parts
Customized Working Volume
Customized Tank Dimension
Sanitary Valve Connection
Tri-Clamp Connection
Different Outlet Size
Level Gauge
CIP Cleaning Port
Fixed Feet Or Movable Wheel Frame
Customized Pneumatic Mixer Speed
Connection With Perfume Filling Machine
Connection With Filtration System
Customized Surface Polishing Requirement
For perfume products containing alcohol, safety configuration should be confirmed according to local regulations, workshop ventilation and production environment.
The HST-SL is suitable when the buyer needs a cleaner and more practical liquid storage tank instead of a simple open container.
It is a good choice for factories that need:
A sealed tank for perfume storage
A pneumatic mixer for gentle liquid blending
A movable tank for flexible workshop use
A sanitary SUS304 stainless steel tank
A bottom discharge valve for easier transfer
A compact tank for small and medium batch production
A storage tank before perfume filling or cosmetic liquid filling
For perfume production, the HST-SL can work as a storage tank, mixing tank or buffer tank before filling. For cosmetic liquid production, it can support cleaner temporary storage and easier product transfer.
It is used for storing and gently mixing perfume, fragrance liquid, lotion, cream and other liquid products. It can also be used as a buffer tank before filling.
No. The HST-SL is an atmospheric storage tank designed for normal pressure storage and mixing. It is not a pressure vessel or vacuum tank.
A pneumatic mixer provides gentle liquid mixing and helps keep perfume or fragrance liquid uniform during storage. It is suitable for low-viscosity liquid products that do not require high-shear mixing.
Standard working volumes include 100L, 200L, 300L and 500L. Other capacities can be discussed according to production needs.
The standard tank material is SUS304 stainless steel. Product contact parts can be customized according to formula and production requirements.
Yes. The tank is equipped with four universal wheels and a handle, making it suitable for flexible movement inside the workshop.
Yes. The bottom discharge valve can be connected with a transfer hose, pump or filling machine according to the production layout.
Yes. Besides perfume, it can be used for lotion, toner, essence, light emulsion and other cosmetic liquid products.
Need A Stainless Steel Perfume Tank For Your Production?
Send us your product type, batch size, viscosity, filling method and workshop layout. HONEMIX can help recommend a suitable HST-SL perfume storage tank configuration for your fragrance, perfume or cosmetic liquid production process.
Mob：+86-18688638225
E-mail：info@honemachine.com
